The right light is what makes a picture come alive. Badly placed lamps create glare on the glass, hard shadows from the frame and dull colours - while good lighting brings out the fur, the eyes and the deep tones of the portrait.
Standing on a sideboard or shelf? Then the portrait already leans back slightly against the wall, which changes the angle to the light. Place the lamp a little closer to the wall or slightly higher up, and check from where you usually sit or stand that no reflection appears in the glass.
The 30-degree rule: aim the light at the portrait from an angle of about 30 degrees from the wall's vertical line. Too steep and the frame casts a long shadow over the top of the motif; too flat and the light reflects straight back into your eyes. At 30 degrees the light falls evenly across the whole picture.
In practice: with a ceiling height of about 2.5 m and the portrait centred at 145-150 cm, place a ceiling spotlight roughly 60-70 cm out from the wall. A picture light mounted above the frame works too - choose one with an arm long enough to reach the whole surface.
Choose warm LED light around 2700-3000 K with a high colour rendering index (CRI 90+). It flatters the classical palette, gives no UV that fades the print and hardly produces any heat.
Finally: avoid direct sunlight and keep the portrait away from radiators and damp rooms, so it stays beautiful for generations.


